Tag: My Hobby

  • Getting into the Ghur-oove with Warcry: Heart of Ghur! How to paint retro Horns of Hashut!

    Getting into the Ghur-oove with Warcry: Heart of Ghur! How to paint retro Horns of Hashut!

    Games Workshop very kindly sent me over a box of the new Warcry: Heart of Ghur set, and I am pleased to share my Horns of Hashut warband with you all here. I went for a deliberately 90s retro style, to harken back to the days of the Chaos Dwarfs who were well known for their affiliation with Hashut.

    If you’d like to learn how I painted these models, keep reading!

    BRASS:

    I start with an even basecoat of Retributor Armour. Then I apply an all-over wash of Reikland Fleshshade. Next, Guilliman Flesh contrast paint was dotted onto the upper centre of each of the skirt panels to create extra shadow. Highlights were then painted on the edges with Liberator Gold. Areas like the chains and any rings are picked out in Stormhost Silver, then given a shade of Nuln Oil.

    HORNS:

    The horns, boots and bombs were all painted Abaddon Black. These then get highlights of Dawnstone with a light drybrush, followed by a more targeted edge highlight where needed. For the horns only, I then apply a thin glaze of Terradon Turquoise contrast paint to add a bit of coolness.

    LEATHER:

    All the red leather was first painted with Mephiston Red, then given a shade of Agrax Earthshade. Highlights were painted on the raised areas using Evil Sunz Scarlet and Troll Slayer Orange, with a few spot highlights of Phalanx Yellow.

    SKIN:

    For the tanned skin, I began with a basecoat of Bugmans Glow, then shaded over it with Darkoath Flesh contrast paint. Highlights were then painted on using Bugmans Glow and Cadian Fleshtone.

    WEAPONS:

    The black weapon shafts were painted the same way as the boots and bombs. The grips were painted with vallejo Goblin Green, washed with Nuln Oil, then highlighted with Goblin Green and Moot Green. The prongs were painted Mephiston Red, then heavily washed Basilicanum Grey, creating darker areas towards the shaft. Highlights were gradually glazed towards the tips of the prongs ending in orange and yellow.

    BASES:

    The bases were painted entirely with Goblin Green, then PVA glue was used to attach grass flock to the top for an old-school grassy field appearance.

    I hope this was helpful to you, and I’d love to see how you paint your Horns of Hashut!

    If you enjoyed this article and want to help support PaintSlam, please consider joining the Patreon! Your support helps me keep the lights on and keep producing content like this!

  • How to paint a Fire Brand Kobold!

    How to paint a Fire Brand Kobold!

    The folks at Steamforged Games kindly sent me a bunch of their Epic Encounters D&D Supplements lately, and I am in love with the miniatures in these sets. Each set contains not only miniatures but a full encounter including double sided playmats and books containing enemy stats and attacks, story beats and more. Going forward I am hoping to bring more painting tutorials for these sets to help you get your models painted to a nice gaming level!

    This Kobold is from the Shrine of the Kobold Queen set. In this tutorial I’ll show you how I painted my unit of 4 shield+spear loaded Kobolds to a playable tabletop standard.

    I started with a spray of Grey Seer undercoat. This is a very light grey, which gives colours placed over it a slightly cooler tone which befits the scales of a reptilian kobold (although some Kobolds are mammalian, I think?)

    Over this, I apply Citadel Contrast Blood Angels Red over all the Kobold scales and flesh. Don’t worry about splashing it onto other areas, since we’ll be using darker colours over most of the other areas.

    Next I took Cygor Brown contrast paint, and applied it over horns, claws, the shield, and the staff shaft. I then used Leadbelcher over all the metal areas.

    I used Zandri dust to pick out a few straps on the spear staff, then I applied Agrax Earthshade over everything so far, including the red areas to help deepen the shadows and tie the colours together.

    The horns, shield, and staff got a quick drybrush with Gorthor Brown paint to bring out some of the woodgrain texture, I also gave the edge of a shield a highlight with the same colour. Then I painted a little purple into the eye area, which will help the bright green glowing eyes pop a little more.

    The eyeball was painted first with Corax White paint, then given a plentiful coat of Tesseract Glow technical paint. I put on enough that it flowed into the sharp crevices of the eye and created a glowing effect.

    I used Ushabti Bone and Zandri Dust to highlight the straps on the spear, as well as bring out a few extra highlights upon the shield. The silver areas recieved a highlight with Mythril Silver.

    Evil Sunz Scarlet was then used on the red areas to highlight the more raised areas and brighten up the overall look of the scales and skin. I used Troll Slayer Orange next to create even smaller highlights.

    Lastly, I used Cygor Brown contrast paint once more to paint in pupils into the eyes, although this is a matter of taste and you might prefer the plan glowing style eyes. To finish the model off, the base was painted completely with Abaddon Black. You could also use a texture paint or other basing materials to match your other models, but I do my miniatures for these sets with plain black.

    And with that, the Kobold is ready to take on some brave adventurers and die for his queen. Here’s the completed group of 4 Fire Brand Kobolds…

    I hope you enjoyed this little painting guide, and if you found it useful please let me know in the comments below. Thanks once again to Steamforged Games for hooking me up! Also let me know if you’ve got any of the Epic Encounters stuff yourself, have you played any of the scenarios yet with your friends?

    If you enjoyed this article and want to help support PaintSlam, please consider joining my Patreon! Your support helps me keep the lights on and keep producing content like this!

  • Check out my OLDHAMMER Wood Elf Army so far (It’s so beautiful TT_TT)

    Check out my OLDHAMMER Wood Elf Army so far (It’s so beautiful TT_TT)

    Hey folks, as you will probably know I’ve been building an oldhammer Wood Elf army for the last couple of years! Thanks to some canny eBay bidding, some lucky finds and some incredibly kind and generous folks on Twitter I’ve been able to amass the Wood Elf army of my childhood dreams.

    It started out with a focus on the 1996 release for Warhammer 4th edition (soon to be replaced by the exciting new 5th edition), but has since introduced models from the 80s, 2000s and today (to quote my local radio station!)

    So this here blog post is to show you *everything* I’ve painted so far for this army. Now, I’ve still got a heck of a lot of unpainted and unassembled stuff in a big box of lovely metal yet to add, but I think this is already a gallery to be proud of. So grab a cup of tea and some hobnobs, and enjoy…

    Boys from the Wood

    Here you can see the core infantry units in the army. With two full units of 16 archers, 10 Waywatchers, 12 Scouts, 14 Wardancers and 25 Glade Guard (aka Eternal Guard) consisting of 15 of the 90s shield versions and 10 of the 80s models. The Wardancer unit includes the Warhammer Quest wardancer character, who can be played as Wychwethyl The Wild in the 4th edition army book.

    Bark as bad as their bite

    The forest spirits have gotten in on the action too, here you can see my unit of Dryads as well as two classic Treemen, one of which is the original Durthu!

    You can be my Oak of Ages

    Here’s Orion, King in the Woods and his lovely lady, Ariel. This is Ariel before she (re)merged with Alarielle during the End Times of the Old World! I based her colour scheme on that of her appearance in Total War: Warhammer 2.

    Wood you please behave

    Here’s the lesser characters and heroes of the army, who serve underneath Orion and Ariel. This is where some of the more recent models come into play, such as the 2005 Battle Standard Bearer and Spellweaver, and the much more recent Araloth, more commonly known as the Nomad Prince kit. You can also see the custom BSB I made from the plastic Wood Elf hero from Warhammer Quest, based directly on the one seen in the army book and White Dwarf of the era.

    Horsing Around

    My army currently includes two units of Glade Riders, one of which is armed with spears and the other is a unit of archers. I found the archer models much harder to find than the spear ones, probably because the spear chaps used to come in a box set whereas the archers were only available in blister packs. I also love the Elven Attack Chariot, which is one of those fabled kits I always wanted as a child but was never able to obtain. I’m super pleased with how it looks with the rest of the army.

    What a drag-on

    Here’s my centrepiece model, my pride and joy. The Wood Elf Forest Dragon. This is the original version that was used as the base for the later Sisters of Twilight kit. I really tried to capture the colours of the original ‘Eavy Metal scheme with this and it even uses the original banner. I’m absolutely delighted to have this model standing front and centre in the army in my cabinet. Truly one of my all-time favourite Warhammer miniatures!

    This miniature even inspired how I painted the recent Stormcast Eternals dragon that the good folks at Warhammer Community kindly let me paint for an article:

    And, for now at least, that’s the whole of my Wood Elf army. Although it’s certainly not the end of it! Stay tuned to the blog and my social media channels for more classic Oldhammer goodness in the near future! Thanks for reading!

    If you enjoyed this article and want to help support PaintSlam, please consider joining the Patreon! Your support helps me keep the lights on and keep producing content like this!

  • Jess’s Quick Tips! How to make your eyes happy.

    Jess’s Quick Tips! How to make your eyes happy.

    I’m sure I’m not alone in having picked up a model to paint, primed it, then sat there looking at it thinking “Where do I even start? What is that detail there? I can’t quite see what it is…”

    If your eyesight and brain are anything like mine, you’ll sometimes be intimidated by odd shapes and bits on a model your eyes can’t quite “read” which makes it hard to get started. Or perhaps due to the lighting in your room or the colour/finish of the primer it’s all just a bit hard for your eyes to make out without straining them.

    So here’s my little tip! Now, this obviously will work best on a lighter undercoat (in this case I’ve used Grey Seer but anything lighter than a mid-grey will also work for this) but what I like to do is pick a wash or contrast shade and apply it all over the model as a first step, as you can see here:

    This is a model from Vae Victis Miniatures, and after priming it Grey Seer (the end of a can, hence it being a slightly rough prime) I washed over the whole model with Citadel Contrast Gryph-Charger Grey. Other good colours to use for this are washes such as Seraphim Sepia or Reikland Fleshshade.

    This highlights all the raised areas and definies all the details nicely without creating a super thick layer of paint that fills in any detail. Plus if you use a shade that you intend to use on the model anyway, it can help speed up the process overall. I used this grey/blue tone because I’ll be using Black Templar on some areas, and the blue will slightly tint the areas that don’t end up pure black and add some colour to an otherwise greyscale area.

    Now I can see what all the details on the model are, and avoid hurting my eyes trying to see what I’m looking at.

    Give it a go and see if it helps you if you’re not feeling confident when starting a new miniature!

    If you enjoyed this article and want to help support PaintSlam, please consider joining the Patreon! Your support helps me keep the lights on and keep producing content like this!

  • Cool minis that’ll knock your socks off!

    Cool minis that’ll knock your socks off!

    Hello there! It’s your friend Jess here! I thought it’d be fun to make a blog post to show off some of the cool minis and stuff I’ve been enjoying lately. If you’re a fan of mini painting (and if you’re a PaintSlammer, that’s a fair bet) I’m sure you’ll find something interesting in this post…

    Animal Adventures RPG

    Firstly, the kind folks over at Steamforged Games kindly sent me a huge bundle of Animal Adventures sets to check out. Now I’d already backed the original Dungeons & Doggies kickstarter, and been very happy with that first set but this is my first time looking at the later products like the Animal Adventures RPG starter set, the Gullet Cove expansion and the Cats & Catacombs miniatures too.

    Over the last weekend I painted up all the miniatures from the Starter Set box which also includes dice, maps, tokens and a playbook with the basic rules and a first campaign to play. It’s all presented extremely nicely, and all the models and rules from the range are compatible with the current 5th edition rules for D&D. I’m excited to paint more of these models and have my first animal adventure with friends 🙂 I also had a few duplicates here from the first kickstarter, so I gave those away over on my Twitter page.

    Dead Man’s Hand

    These are fun, I got a box of the lady Gunfighters for the Dead Man’s Hand game along with the rulebook and cards from Bad Squiddo Games. This is a great modular kit of badass ladies from the Wild West, with tons of head and weapon options and tons of scope for making the warband or gang of your desire. I mostly painted these using Citadel Contrast colours which helped me get them all tabletop ready in short order!

    If you want something that’s a little different from the usual fantasy, sci-fi or WW1/2 settings, I’d recommend giving Dead Man’s Hand a look.

    JRPG Heroes!

    I’ve also really been enjoying painting miniatures based on my favourite JRPG heroes. I’m a huge fan of the JRPG videogame genre and it’s so fun to bring some of my favourite legendary characters to life like this. These particular models are sculpted by RN Estudio, and purchased through We Print Miniatures (affiliate link!).

    Above, you can see I’ve painted Chrono, Frog, and Marle from Chrono Trigger, as well as the hero from Dragon Quest 8, and Vivi from Final Fantasy 9. I’ve also still got Tidus and Yuna from FFX and Cloud, Tifa, Barrett and Aeris from FFVII on the pile of things to enjoy!

    If you pick any of these up from We Print Miniatures, you can get 10% off your order if you use the code JEWELKNIGHTJESS at checkout too!

    Rivenstone

    I was reached out to by the creators of Rivenstone, Broken Anvil, and they sent me one of their new miniatures from the upcoming game that recently had a successful Kickstarter. This model was cast in the new Siocast material, which I greatly enjoyed painting. I think the material is a great thing for the industry as it makes small runs much more affordable and achievable. I can’t wait to see more on this game.

    Steel Colosseum

    This is super cool, I was sent an early 3D print of Insectoid, one of the battle robots from the upcoming Steel Colosseum game from Needy Cat Games. Think Robot Wars with even wackier and unique battlebot designs and an awesome almost graffiti-like art style. Each model in the set is very different from the others, go take a look!

    VAE VICTIS MINIATURES

    Vae Victis Miniatures were very kind to send me the STL for their new Musketeer sculpt, one of many they’ve released through their patreon service. This was printed for me by @OMechanicum. This is a wonderfully clean and characterful model, and I’d definitely like to get more miniatures from these folks in the future. Go give them a look 🙂

    And Finally…

    @OMechanicum also printed me off the chibi Jess model which is available to all supporters of the PaintSlam Patreon! This is my first time holding the miniature in my own hands and I’m absolutely delighted by how it came out. If you’d like to print and paint her yourself, please consider supporting me on Patreon. You help keep PaintSlam going and you don’t even have to stay a patreon for long. Even one month of support entitles you to the miniature and I appreciate every single penny.

    Next Time…

    I’m planning to do these kind of posts semi-regularly, so look out for the next one where I’ll hopefully have some cool new miniatures to show off. I’m hoping to be able to show you some really neat models from my friends at Dead Earth Games and Warp Miniatures to start… 😀

    If you want me to feature your minis or store here on the blog please feel free to DM me over on Twitter! I always love checking out cool new stuff and showing it off.

    If you enjoyed this article and want to help support PaintSlam, please consider joining the Patreon! Your support helps me keep the lights on and keep producing content like this!

  • How to Paint: Game Ready Necromunda Underhive Outcasts!

    How to Paint: Game Ready Necromunda Underhive Outcasts!

    In this first guide to painting Necromunda Underhive Outcast gang members, I will run through the steps to paint one of these models in a quick way, from a game-ready standard using mostly Contrast paints, to taking the model further with extra details and highlights. This tutorial is made possible thanks to Games Workshop, who kindly provided a box of the new Necromunda Outcasts gang for me to preview.

    Disclaimer: I’m no ‘Eavy Metal painter, so I won’t pretend that I’ll ever post really high level, clean painting here on the blog. But if you’re someone who enjoys painting and wants to improve with easily achievable results I hope my tutorials will prove useful. This is my first tutorial like this, so I’d love to know if this helps you out at all!

    There’s a whole load of freedom with how to assemble these models, so I picked the head with the small tuft of hair, a las-pistol and chainsword. I also liked the look of this particular body. With my model assembled, I primed it with Wraithbone spray paint.

    To begin with, the skin areas were given a layer of Guilliman flesh. It’s entirely possible you’ll get paint on areas where you don’t want it to, but do not fret! Simply clean up with a little wraithbone from a pot to correct any major mistakes. Any minor mistakes you might not even spot until later, so don’t worry too much for a game-ready standard.

    Next I picked out the tuft of hair with Volupus Pink, and the trousers with Skeleton Horde.

    I picked out all the rest of the armour areas with Plaguebearer Flesh, and the chainsword with Iyanden Yellow. At this point it’s not much to look at, but it’ll come together with the next steps. You might miss a few small areas and not spot them with a light colour like these, so it can help to take a photo of the model to help you spot mistakes. In the picture above I can see a few areas I missed with the green.

    I then picked out any areas which would be metallic with Black Templar, to prepare them for the silver paint that would follow. I also decided to go over the Skeleton Horde trousers with Cygor Brown contrast paint to add further contrast and break up the plaguebearer flesh armour. Again, I used the photo above to look to see if any major mistakes presented themselves.

    For the last steps for this quick Game-Ready level, I used Leadbelcher over metal areas like rivets, the gun, the chainsaw blades and motor and the skull symbol on the ganger’s chest. I also applied leadbelcher over the whole base. All these metal areas were given a coat of Agrax Earthshade wash. I also dropped agrax into the more prominent dings and scratches of the armour. I then picked out his right (our left) knee pad with Iyanden Yellow.

    At this point, you could certainly call this model game ready and have it look respectable for a game of Necromunda. But there’s still work we can do to bring it up a bit! Let’s go ahead and take it further, yes!

    Firstly, I took Cadian Fleshtone and smoothed out the flat areas of skin whilst leaving the deeper colours in the recesses. I then highlighted this up using Kislev Flesh, making the muscles and facial details pop nicely.

    To finish the skin off I used a little Magos Purple around the face and arms to vary the skin tone a little. Then, I mixed in some thunderhawk blue with the cadian fleshtone, and painted this on in thin layers to create a believable stubble effect on the top of the head and for the model’s 5 o’clock shadow.

    Next up, I took Krieg Khaki and Flayed One Flesh to highlight the raised edges of all that green armour.

    Next up to make the armour really pop and change up the tones, I use a little Coelia Greenshade in the recesses and also applied it towards the top of the larger flat armour panels. Then I grabbed Stormhost Silver to highlight all the metal areas, including the shoulder spikes and the skull emblem.

    At this point I remembered to paint the little scrappy “purity seal” on the right boot. To do this I started by painting it Zandri Dust, then shaded over it with Agrax Earthshade. This was then highlighted up with Rakarth Flesh.

    Now it’s time to break out the Black Templar again. This can be applied carefully to the purity seal to add text by using small lines and dots. I also used this to freehand some hazard stripes onto the chainsword. I didn’t measure this or anything, I Just did it by eye. It’s a little rough, but this is the underhive. This was then highlighted along the edges again with Flayed One Flesh, which also was used to pick out some scratches.

    With the chainsword done, we’re getting close to the end. I took some Scrag Brown, and watered it down nice and thin. I then dropped this into recesses of the silver areas, and dotted it onto some of the flatter bits. I did the same again with a bit of Fire Dragon Bright, but in smaller areas than the Scrag Brown.

    Finally, I used Thondia Brown and Baneblade Brown to highlight up the trousers. I also used dots and lines of Thondia Brown to add weathering to the armour to show where paint had chipped away. To add final touches, I used an oxide-earth pigment powder on the base, armour panels and lower legs of the model. I love how this made some of the armour look extremely old and weathered.

    And that’s how the model finished up! I hope you like it, and I hope you found something interesting or useful in this little tutorial! This is the most in-depth painting post i’ve ever made I think, so please let me know if you liked it!

    Finally, here’s a shot of the 4 Outcasts I’ve painted so far (from the box of 12!). The plan is to make each one quite unique from the others, so these 4 are built “out of the box” but I’ll probably raid my bits box for the next ones! I’m looking forward to painting the rest of this gang up, once again a huge thank you to Games Workshop and the Warhammer Community for the models and support.